Turning the mfc on and off, On/off setting, Turning the mfc on and off -4 on/off setting -4 – Brother MFC-420CN User Manual
Page 24
1 - 4 INTRODUCTION
Turning the MFC on and off
When the machine is idle, you can turn it on and off by pressing the
On/Off
key. In Off mode, no MFC operations will be available. Even
if you turned the MFC off, it will periodically clean the print head to
preserve print quality.
Turning the MFC off
Press and hold down the
On/Off
key
until the LCD shows:
The LCD light will go off.
Turning the MFC on
Press and hold down the
On/Off
key
until the LCD shows:
The LCD will show the date and time (Fax
mode).
On/Off Setting
You can customize the MFC’s
On/Off
key. The default setting is
Fax Receive:Off
. Your MFC will not work when it is switched Off,
but it will purge the ink head periodically. If you turn this setting to
On
,
you can receive faxes or calls even when the MFC is switched
Fax Receive:Off
.
1
Press
Menu/Set
,
1
,
6
.
2
Press
▲
or
▼
to select
On
(or
Off
).
3
Press
Menu/Set
.
4
Press
Stop/Exit
.
Even in Off mode, you can receive fax and telephone calls by
customizing the
On/Off
key as explained below.
If you have connected an external telephone, it is always
available.
Shutting Down
Please Wait
General Setup
6.On/Off Setting