Brother MFC-420CN - Manual (Page 43)

GETTING STARTED 2 - 3
General Setup
Setting the Mode Timer
The MFC has four temporary mode keys on the control panel:
PhotoCapture, Copy, Fax and Scan. You can change the number of
seconds or minutes the MFC takes after the last Copy, Scan or
PhotoCapture operation before it returns to Fax mode. If you select
Off , the MFC stays in the mode you used last.
1
Press Menu/Set , 1 , 1 .
2
Press ▲ or ▼ to select
0 Sec , 30 Secs , 1 Min , 2 Mins ,
5 Mins or Off .
Press Menu/Set .
3
Press Stop/Exit .
Setting the Paper Type
To get the best print quality, set the MFC for the type of paper you
are using.
1
Press Menu/Set , 1 , 2 .
2
Press ▲ or ▼ to select
Plain , Inkjet , Glossy or
Transparency .
Press Menu/Set .
3
Press Stop/Exit .
The MFC ejects paper with printed surfaces face up onto the
paper tray in the front of the machine. When you use
transparencies or glossy paper, remove each sheet immediately
to prevent smudging or paper jams.
General Setup
1.Mode Timer
General Setup
2.Paper Type