Setting the beeper volume, Setting the speaker volume, Setting the beeper volume -5 – Brother MFC-420CN User Manual
Page 45: Setting the speaker volume -5
GETTING STARTED 2 - 5
Setting the Beeper Volume
You can change the beeper volume. The default (factory) setting is
Low
. When the beeper is on, the MFC will beep when you press a
key, make a mistake or you send or receive a fax.
1
Press
Menu/Set
,
1
,
4
,
2
.
2
Press
▲
or
▼
to select your option.
(
Low
,
Med
,
High
or
Off
)
Press
Menu/Set
.
3
Press
Stop/Exit
.
Setting the Speaker Volume
You can adjust the MFC’s one-way speaker volume.
1
Press
Menu/Set
,
1
,
4
,
3
.
2
Press
▲
or
▼
to select
Low
,
Med
,
High
or
Off
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
—OR—
In Fax mode
, you can adjust the speaker volume by pressing
Hook
, and then selecting a speaker volume level.
Press
or
to adjust the volume level. The LCD shows the
setting you are choosing. Each key press changes the volume to the
next setting. The new setting will remain until you change it again.
Volume
2.Beeper
Volume
3.Speaker