Canon EOS C500 - Manual (Page 18)

Exporting Clips
18
NOTES
The following operations cannot be performed during export.
- Playing back a clip
- Adjusting development settings
- Viewing clip information or frame information
Removing clips from the export queue
Follow the steps below to remove a RAW clip from the export queue.
1. Select the RAW clip to remove from the export queue.
• You can select multiple clips at once.
2. Click in the export panel.
• The selected RAW clip will be removed from the export queue.
Changing the destination folder
You can change the destination folder for clips added to the export queue.
1. Select a RAW clip in the export queue.
• You can select multiple clips at once.
2. In the export window, click Change Folder and select the destination folder.
Adding a RAW clip in the export result list to the export queue again
You may find it convenient to add a RAW clip in the export result list to the export queue again in cases
such as when an error has occurred.
1. Select a RAW clip in the export result list.
• You can select multiple clips at once.
2. In the export window, click Re-add to Queue.
• The selected RAW clips will be added to the export queue with their previous settings.
• If necessary, you can also change the destination folder.
Saving the export log
1. In the Tools menu, select User Configuration.
2. Place a check in the Save Export History box.
3. Click Browse under Destination folder and select a destination folder.
4. Click OK.
• The export log from this point on will be saved in an export log file (CSV format).
• Export log files are generated on a daily basis on days in which files are exported. The file’s name
Unknown Error An error not covered by the other error messages in this list, such as
a lack of memory error, has occurred. After restarting your computer,
perform the operation again.
Item Description
COP
Y