Canon EOS C500 PL - Manual (Page 13)

13
Connection Wizard
If you prefer, you can enter manually the details of the Wi-Fi network you want to connect to (for
example, if your Wi-Fi network is operating in stealth mode and cannot be detected by the
transmitter or to connect to a Wi-Fi-enabled portable device through an Ad Hoc connection).
After step 2 in the Selecting the Wi-Fi Network procedure (A 11):
1
Select [Manual] and then press SET.
2
Select the wireless connection mode
and then press SET.
[Infrastructure]: Connect to a Wi-Fi network via a
wireless router.
[Ad Hoc 11b/g]: Connect directly to a Wi-Fi-
enabled computer or other device
using the 2.4 GHz band.
[Ad Hoc 11a]: Connect directly to a Wi-Fi-
enabled computer or other device
using the 5 GHz band.
3
Enter the Wi-Fi network’s name (SSID).
Select [Input] and then press SET to open the
keyboard screen.
Use the joystick or turn the SELECT dial to select
a character and then press SET to add it. Repeat
as necessary to enter the SSID.
After entering the SSID, select [OK] and then
press SET.
Select [OK] and then press set.
Entering the Wi-Fi Network’s Details Manually
COP
Y