Canon EOS C500 PL - Manual (Page 21)

21
After establishing a connection between the camcorder and Wi-Fi network (the white
icon appears on the upper left of the screen), you can start the Wi-Fi Remote application on any
Wi-Fi-enabled device* that has a Web browser** and is connected to the same Wi-Fi network.
Refer also to the instruction manual of the Wi-Fi enabled device used.
* For details about compatible devices, operating systems, Web browsers, etc. please visit your local Canon
Web site.
** A Web browser is required that supports JavaScript and is enabled to accept cookies.
1 Press the STATUS button.
2 Push the joystick up/down or turn the SELECT dial to display the [Wi-Fi Remote 3/4]
status screen.
Check the IP address assigned to the camcorder. If necessary, write it down.
3 Press the STATUS button again to close the status screen.
Starting Wi-Fi Remote
Checking the Camcorder’s URL
COP
Y