Canon EOS C500 PL - Manual (Page 10)

Playing Back and Developing Clips
10
Developing Clips
Adjusting the development settings
RAW clips must be developed before they can be played back or exported. You can adjust various
development settings using the development settings panel.
1. Select the desired RAW clip from the clips panel.
• The clip will be developed and the video display area will show the first frame from the clip.
2. In the development settings panel, adjust the desired settings.
• The clip is developed again based on the new settings and then displayed in the video display
area.
3. Play back the clip (0 6).
Development settings
Default settings are underlined.
Setting Setting options Function
White balance
adjustment mode Shooting
Settings, Click
White Balance,
Color
temperature Selects how the white balance is adjusted.
Click White Balance — Adjusts the white point. After clicking the button, click
in the video display area to adjust the white balance by
using the color of the location clicked as the white point.
Color Temperature 2,000 to
15,000 K (5200) Allows you to adjust the color temperature using the
slider or by directly entering a value (in increments of
100 K). You can click K to return the setting to its
default value.
Brightness -3.0 to 3.0
(0.00) Allows you to adjust the brightness using the slider or by
directly entering a value (in increments of 0.01). You can
click K to return the setting to its default value.
Return white balance to default
settings
White balance adjustment mode
Color temperature
Brightness
White balance shift
Sharpness
View gamma
Quick development
Click White Balance
COP
Y