Other functions of wireless lan, Checking setting information, Changing communication mode – Canon SELPHY CP900 User Manual

Page 42: Changing the printer name, Setting the ip address manually

Advertising
background image

41

Other Functions of Wireless LAN

Connecting to Other Access Points (Infrastructure Mode)

After connecting to an access point in infrastructure mode

(p. 31)

, you can connect to another access point

as follows.

O

Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the

o

button.

O

Press the ud buttons to select [Access Point Connect], and then press the o button.

O

Specify as described on

p. 31

.

O

[Access Point Connect] is available only when the selected communication mode (below) is [Infrastructure].

Checking Setting Information

You can check connection settings such as the communication mode and channel, and printer information

such as the printer name and IP address.

O

Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the

o

button.

O

Press the ud buttons to select [Confirm Settings], and then press the o button.

O

Press the ud buttons to check setting information.

O

Press the v to go back.

Changing Communication Mode

You can change the communication mode

(p. 28)

to connect to another device, or stop using wireless LAN.

O

Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the

o

button.

O

Press the ud buttons to select [Comm. Mode], and then press the o button.

O

Press the ud buttons to select a communication mode, and then press the o button.

O

Press the ud buttons to select [Disable Wireless LAN], and then press the o button to stop using

wireless LAN.

Changing the Printer Name

You can change the printer name

(p. 29)

.

O

Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the

o

button.

O

Press the ud buttons to select [Other Settings], and then press the o button.

O

Press the ud buttons to select [Set Printer Name], and then press the o button.

O

Press the EDIT button to display the screen to enter characters and enter the printer name

(p. 42)

.

Setting the IP Address Manually

You can specify the printer's IP address and subnet mask manually.

Display the settings screen.

O

Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and

press the o button.

O

Press the ud buttons to select [Other Settings], and then press the o button.

O

Press the ud buttons to select [IP Address Settings], and then press the o button.

O

Press the ud buttons to select [Manual], and then press the o button.

Set the IP address.

O

Press the lr buttons to select the position, press the ud buttons to set the value, and

then press the o button.

1

2

Advertising