Canon SELPHY CP900 - Manual (Page 43)

42
Set the subnet mask
O
Press the lr buttons to select the position, press the ud buttons to set the value, and
then press the o button.
Check the settings
O Check the displayed setting details and press the o button.
Resetting Wireless LAN Settings
You can reset the specified printer name and access point information.
O Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the
o button.
O Press the ud buttons to select [Reset Settings], and then press the o button.
O Check the displayed details and press the o button.
Character Entry Method
You can use the character entry screen by pressing the EDIT button when setting the printer name or
encryption key.
Enter a character.
O Press the udlr buttons to select a character, and
then press the o button. You can enter a space by
selecting [Space] and pressing the o button.
Delete a character.
O Press the udlr buttons to select [ ], and then
press the o button.
Switch the character type.
O You can change the character type each time you press
the EDIT button in order of alphabetical characters
(upper case), alphabetical characters (lower case),
numbers, and symbols.
Return to the previous screen.
O Press the udlr buttons to select [Finish] and press
the o button to set the entered characters and return
to the previous screen.
O Press the v button to return to the previous screen
without setting the entered characters.
3
4