Printing when a power outlet is not available – Canon SELPHY CP900 User Manual

Page 49

Advertising
background image

48

Printing When a Power Outlet is not Available

You can use the battery pack NB-CP2L (sold separately) and charger adapter CG-CP200 (sold separately)

to print images where there is no power outlet. You can print approximately 36 sheets* of postcard size paper

with a fully charged battery.

* The number of printable pages is determined by our testing conditions. It may differ depending on the

printing conditions.

Installing the Battery

Remove the battery terminal cover.

Attach the battery to the charger adapter.

O

First insert in the direction indicated by

, and then in

the direction indicated by

until it clicks and locks into

place.

Charging the Battery

Connect the power cord to the charger adapter
with the attached battery.

X

The battery charge starts and the orange lamp will be lit.

X

The battery charge will complete after approximately 4

hours and the green lamp will be lit.

O

The charge will continue even if you turn SELPHY on

while the charger adapter is connected to it. However,

the charge stops while printing.

Using SELPHY with a Battery

Connect the charger adapter to SELPHY.

O

For cautions concerning the battery, refer to the user guide included with the battery.

O

Keep SELPHY on a stable surface such as a desk while it is connected to the charger adapter and take care not
to unplug the charger adapter cable.

1

2

Advertising