Canon PowerShot G15 - Manual (Page 251)

251
Using Optional Accessories
3
Choose shooting mode <G>,
<M>, <B>, or <D>.
z z Flash settings can only be configured in
these modes. In other modes, the flash
is adjusted and fired automatically, as
needed.
4
Set the white balance to [h]
(= 134).
5
Configure the external flash.
z z Press the < n> button, choose [Flash
Control] on the [ 4] tab, and then press
the < m> button.
X X Options already set on the flash itself are
displayed.
z z Press the < o><p> buttons or turn
the < 7> dial to choose an item, and
then adjust the setting by pressing the
< q><r> buttons.
z z Available settings vary depending on the
shooting mode and the flash attached
( = 257).
• Settings for the built-in flash cannot be configured while a Speedlite EX
series flash is attached, because that setting screen is no longer accessible.
• You can also access the setting screen by pressing the < r> button for at
least one second.
• Flash settings in [ ] shooting mode can be configured just as they are in
< G> mode.
• 600EX-RT/580EX II only: [Flash Control] is not available if the external flash
has been set up for stroboscopic flash.
• 320EX only: Auto LED lighting is only available in low-light movie recording
or in Movie mode. In this case, the [ ] icon is shown.