Canon ImageCLASS MF7480 - Manual (Page 315)

Troubleshooting
11‑18
Message Description Action
Check the cable.
(imageCLASS MF7480/
MF7470 Only) The machine and cable are not
connected properly. Turn off the machine, check
that the machine is connected
to the network using the
proper cable, and then turn the
machine on.
Check the TCP/IP.
(imageCLASS MF7480/
MF7470 Only) The machine’s TCP/IP is not
operating. Check the IP Address Settings
in Network Settings in System
Settings (from the Additional
Functions screen). (See
Chapter 6, “Network
(imageCLASS MF7480/MF7470
Only),” in the Reference
Guide or “Set the Machine for
Network Usage (imageCLASS
MF7480/MF7470 Only),” in the
Starter Guide.)
Check your document. Paper or originals are jammed. Remove any jammed paper or
originals. (See “Clearing Jams,”
on p. 11‑2, and “Feeder,” on
p. 11‑5.)
Load Paper. The machine has run out of
paper. No more prints can
be made.
– Load paper. (See “Set Up
the Machine,” in the Starter
Guide.)
–
The paper drawer is not
inserted correctly.
– Insert the paper drawer
properly. (See “Set Up the
Machine,” in the Starter
Guide.)
–