Canon ImageCLASS MF7480 - Manual (Page 367)

Machine Settings
12‑38
System Settings
SMTP Authentication
(SMTP AUTH) Sets whether to use the SMTP server requires SMTP
Authentication (method for authenticating users who have
logged in the POP server before sending e‑mail).
Off Disables SMTP Authentication.
On Enables SMTP Authentication.
User
Password
–
–
SMTP Server Registers the SMTP server name.
E‑mail Address Enters the e‑mail address your machine will use (max. 64
characters).
POP Server Enters the POP server IP address or name (max. 48
characters).
POP Address Enters the login name for access to the POP server (max. 32
characters).
POP Password Enters the password for access to the POP server (max. 32
characters).
POP Interval Sets the interval you want the POP server to check for
incoming e‑mail. If the interval is set to 0, the POP server is
not checked automatically. (1‑99)
Startup Time Settings Sets the time period required to delay the startup of network
communications for the machine (0‑300sec).
Communications Settings Sets the fax and e‑mail/I‑fax communication.
E‑mail/I‑Fax Settings* 1 Sets the e‑mail/I‑fax communications.
Maximum TX Data Size Sets the maximum data size for outgoing e‑mail messages
and I‑fax documents. If the e‑mail message send job exceeds
this data size limit, it is split up into several e‑mail messages
before being sent. However, if an I‑fax transmission exceeds
the data size limit, it is handled as an error, and it is not sent.
(0MB‑99MB)
Divided TX over Max.Data
Size Sets whether to divide a document into separate files when it
is sent if its size exceeds the data size you specify.
Off
On
–
–
Default Subject The subject that you enter here is used as the default subject
whenever you do not enter a subject when sending a job.
* 1 Indicates the item that appear only for the imageCLASS MF7480.