Setting paper size and type for the stack bypass – Canon ImageCLASS MF7480 User Manual

Page 88

Advertising
background image

2‑21

Original and Paper

Setting Paper Size and Type for the Stack Bypass

You can set the paper size and type that the stack bypass uses beforehand. This setting is
useful if you always load the same paper size and type into the stack bypass.

When printing on special types of paper, such as heavyweight paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavyweight paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service
repair, or the paper could jam.
If you are using the stack bypass as a paper source for the Copy function, you must select the stack bypass
when specifying the Drawer Eligibility for APS/ADS setting. (See “Automatic Paper Selection/Automatic
Drawer Switching,” on p.
2‑25.)

1

Press (Additional Functions).

2

3

① Press [▼] until [Stack Bypass Standard

Settings] appears.

4

5

① Press [On].

② Press [Store].

6

Select the desired paper size.

Advertising
This manual is related to the following products: