Canon ImageCLASS MF7480 - Manual (Page 73)

Original and Paper
2‑6
Orientation
You can place an original either vertically or horizontally. Always align the top edge of your
original with the back edge of the platen glass (by the arrow in the top left corner) or the
back edge of the feeder.
Platen Glass
Vertical Placement Horizontal Placement
Feeder
Vertical Placement Horizontal Placement
If the top edge of the original is not aligned with the back edge of the platen glass (by the arrow in the top left
corner), your original may not be scanned correctly, depending on the scan mode that you have set.
Originals of the following sizes can be placed either vertically or horizontally. However, the scanning speed
for horizontally placed originals is somewhat slower than vertically placed ones. Place originals horizontally
when scanning with a Preset Zoom, such as when enlarging an LTR original onto 11" x 17" paper.
Platen glass: LTR, STMT
Feeder: LTR
Horizontally placed LTR and STMT originals are referred to as LTRR and STMTR.
11" x 17" and LGL originals must be placed horizontally on the feeder.
–
–
–
–
–
–