12‑16 communications settings – Canon ImageCLASS MF7480 User Manual

Page 345

Advertising
background image

Machine Settings

12‑16

Communications Settings

Auto Redial

Sets whether to redial automatically when the other line is
busy or a transmission error occurs. (See Chapter 4, “Sending
and Receiving,” in the Reference Guide.)

Redial Times

Sets the number of retries. (1 times−10 times)

Redial Interval

Sets period of time before redialing. (2 min.−99 min.)

Transmission Error Redial Sets whether the machine redials automatically when

transmission error occurs.

On

Off

Check Dial Tone Before
Sending

Sets whether to check the telephone line condition.

Off

On

Rotate Send

Sets whether to use the TX Rotation function. TX Rotation
function automatically corrects the orientation of the
document by rotating the image when sending. For example,
if you set a document that has a horizontal orientation
vertically on the machine, the machine rotates the image and
sends it horizontally.
You can use the TX Rotation mode for an LTR document only.
The TX Rotation mode is not available if you are using the
Direct Sending or Manual Sending.

On

Off

RX Settings

Sets the reception features.

ECM RX

Sets whether the ECM (Error Correction Mode) reception is
activated.

On

Off

Advertising
This manual is related to the following products: