Canon PowerShot ELPH 115 IS - Manual (Page 117)

117
ç Contents ç Chapter Contents
• On-screen image brightness in step 3, when you pressed
the shutter button halfway, may not match the brightness
of your shots.
• With shutter speeds of 1.3 seconds or slower, there will
be a delay before you can shoot again, as the camera
processes images to reduce noise.
• Set [IS Mode] to [Off] when using a tripod or other means
to hold the camera still ( = 146 ).
• If the flash fires, your shot may be overexposed. In this case, set
the flash to [ !] and shoot again.
Still Images
Shooting Stitch Assist Images
Shoot a large subject by taking multiple shots at various positions,
and then use the software ( = 35 ) to combine them into a
panorama.
1
Choose [x] or [v].
z z Follow steps 1 – 2 in “Specific
Scenes” ( = 98 ) and choose
[ x] or [v].
2
Take the first shot.
X X The first shot will determine the
exposure and white balance.