Canon PowerShot ELPH 115 IS - Manual (Page 295)

295
ç Contents ç Chapter Contents
ELPH 130 IS IXUS 140 ELPH 120 IS IXUS 135
Wi-Fi
Connection failed
• No access points were recognized. Check the access point settings
( = 218 ).
• A device could not be found. Turn the camera off and on again, and retry
the connection.
• Check the device you want to connect to and make sure it is ready for
connection.
Cannot determine access point
• The WPS buttons on numerous access points were pressed
simultaneously. Try reconnecting again.
No access points found
• Check to make sure that the access point is turned on.
• When connecting to an access point manually, make sure that you entered
the correct SSID.
Incorrect Wi-Fi encryption key/Incorrect Wi-Fi security
settings
• Check the access point security settings ( = 216 ).
IP address conflict
• Reset the IP address so that it does not conflict with another.
Disconnected/Receiving failed/Sending failed
• You may be in an environment where Wi-Fi signals are obstructed.
• Avoid using the camera’s Wi-Fi function around microwave ovens,
Bluetooth devices, and other devices that operate on the 2.4 GHz band.
• Bring the camera closer to the other device you are trying to connect to
(such as the access point), and make sure there are no objects between
the devices.
• Check the connected device to make sure it is not experiencing errors.