Canon PowerShot ELPH 115 IS User Manual
Page 224
224
ç
Contents
ç
Chapter Contents
z
z
Choose the computer to
connect to, following steps
7 – 8 in “Adding a Computer”
(
). The computer is now
added to the list.
•
For information on the access point’s encryption key, refer to the
body of the access point or its user manual.
•
Up to 16 access points will be displayed. If no access points are
detected, choose [Manual Settings] in step 2 to manually set an
access point. Follow on-screen instructions and enter an SSID,
security settings, and an encryption key.
•
When you use an access point that you have already connected to
for connecting to another device, [*] is displayed for the encryption
key in step 3. To use the same encryption key, press the <
o><p>
buttons to choose [Next], and then press the <
m> button.
•
To add multiple computers, repeat the above procedures starting
from step 1.