Checking your wi-fi environment – Canon PowerShot ELPH 115 IS User Manual

Page 216

Advertising
background image

216

ç

Contents

ç

Chapter Contents

Checking Your Wi-Fi Environment

To use Wi-Fi, a Wi-Fi base unit (Wi-Fi router, etc.) that acts as

your access point must be connected to a computer. Be sure to

use a Wi-Fi base unit that conforms to the Wi-Fi standard listed in

Specifications (

=

319

).

If you are already using Wi-Fi, confirm the following items and

mark each one on the Check sheet. For instructions on checking

network settings, refer to the access point user guide.

If system administrator status is needed to adjust network

settings, contact the system administrator for details.

These settings are very important for network security.

Exercise adequate caution when changing these settings.

Check sheet

Network name (SSID/ESSID)

The SSID or ESSID for the access point you use.

Network certificate/data encryption

(encryption method/encryption mode)

The method for encrypting data during

transmission via Wi-Fi.

○ None

○ WEP (open system

authentication)

○ WPA-PSK (TKIP)

○ WPA-PSK (AES)

○ WPA2-PSK (TKIP)

○ WPA2-PSK (AES)

Encryption key (network key)

The data encryption key used for transmission

via Wi-Fi.
Key index (sent key)

The key specified when using WEP for Network

certificate/data encryption.

○ 1

Advertising