Dividing scenes 101, Cop y – Canon XA10 User Manual

Page 101

Advertising
background image

Dividing Scenes

101

Dividing Scenes

You can divide scenes in order to leave out the best parts and later cut out the rest.

1 Play back the scene you want to divide.

2 Pause the playback at the point where you want to divide the scene.

3 Open the scene division screen.

[Edit]

[Divide]

4 Bring the scene to a precise point, if necessary.

• Playback controls will appear on the screen (

0 94). Use any special playback modes (fast

playback, frame reverse/advance) as necessary to locate the desired point.

5 Divide the scene.

[A Divide]

[Yes]

• The video from the division point to the end of the scene will appear as a new scene in the index

screen.

NOTES

• When advancing/reversing frames while dividing the scenes, the interval between frames is about

0.5 seconds.

• If the scene cannot be divided at the point where you paused the playback, advance/reverse a

frame and then divide the scene.

• During the playback of a scene that was divided, you may notice some anomalies in the picture/

sound at the point where the scene was cut.

• Scenes that are too short (less than 3 seconds) cannot be divided.
• Scenes cannot be divided within 1 second from the beginning or the end of the scene.

Operating modes:

COP

Y

Advertising