Wps connections (pin mode), See p.22, Cop y – Canon Wireless Transmitter WFT-E6A User Manual

Page 22

Advertising
background image

22

This is a connection mode when using a wireless LAN terminal compatible with Wi-Fi Protected
Setup (WPS). In PIN code connection mode (PIN mode), an 8-digit identification number
specified on the camera is set on the wireless LAN terminal to establish a connection.
Even if there are multiple wireless LAN terminals active in your area, this is a relatively reliable
method of establishing a connection using a shared identification number.
It may take about one minute to establish connection.
Connection may not be possible if stealth functions are enabled on the wireless LAN
terminal. Deactivate stealth functions.

1

Select [WPS (PIN mode)].

Turn the <5> dial to select [WPS (PIN mode)],
and then press <0>.

Select [OK] and press <0> to go to the next
screen.

2

Specify the PIN code on the wireless
LAN terminal.

On the wireless LAN terminal, specify the 8-digit
PIN code shown on camera LCD monitor.

For instructions on setting PIN codes on the
wireless LAN terminal, refer to the instruction
manual of the wireless LAN terminal.

Select [OK] and press <0> to display the
confirmation screen.

3

Establish a connection with the
wireless LAN terminal.

Select [OK] and press <0> to establish a
connection with the wireless LAN terminal.

When the connection with the wireless LAN
terminal is established, the [Network] screen
(p.23) is displayed.

WPS Connections (PIN Mode)

COP

Y

Advertising