Canon Wireless Transmitter WFT-E6A - Manual (Page 56)

56
Remote Capture [Camera control]
2 Set the lens focus mode switch to
<f>.
Under these conditions, click the release button
(⑤). When you let go of the button, the camera
autofocuses and the picture is taken.
With One-Shot AF, the picture is not taken if focus
is not achieved. Try following the next steps to
display Live View image and focus manually.
3 Display Live View image.
Click the Live View shooting button (⑯).
X The AF/MF switch (⑥) is set to <g>, and Live
View image is displayed.
If Live View image is not displayed, enable Live
View shooting in the menu (⑮).
To make Live View image display more
responsive, click the Live View image size
switching button (⑱). Live View image is now
displayed at a smaller size, improving
responsiveness. To restore the original size, click
this button again.
4 Manually adjust the focus.
Click the buttons < >, < >, < >, < >,
< >, and < > to adjust the focus. Note that
autofocus is not supported during Live View image
display.
To focus more closely, click < >, < >, or
< >. To focus farther away, click < >,
< >, or < >.
Three levels of focus adjustment are available.
<
> < > : Largest increment
< > < > : Intermediate increment
< > < > : Smallest increment
⑯ ⑱
COP
Y