Canon Wireless Transmitter WFT-E6A - Manual (Page 78)

78
Using the Transmitter with WFT Server
4 Select the language.
Select a language on the bottom of the screen.
Web browsers that support JavaScript now display
the screen on the left.
A message is displayed if JavaScript is not
supported. Selecting not to use JavaScript will
display the screen on the right, with limited
functions.
Refer to “Viewing Images” on page 53.
Images on camera memory cards can be viewed and downloaded. To switch cameras,
enter the IP address of the master or slave camera in the web browser.
Refer to “Remote Capture [Camera control]” on page 55. Remote capture as described on
pages 58 and 59 is also possible.
To switch cameras, enter the IP address of the master or slave camera in the web browser.
You can access slave cameras, adjust the focus and configure shooting functions, and then
use the master camera for linked shooting.
When shooting remotely with linked shooting, access the master camera. If you connect to a
slave camera, only that slave camera will shoot, without linked shooting.
View Images on the Camera
Shoot Remotely
COP
Y