Automatic image transfer after each shot, Cop y – Canon Wireless Transmitter WFT-E6A User Manual

Page 30

Advertising
background image

30

An image can be automatically transferred to the FTP server immediately after shooting. You
can also continue still photo shooting even while images are being transferred.
Before shooting, be sure to insert a memory card in the camera. If you shoot without recording
images, they cannot be transferred.
Note that automatic transfer of movie is not supported. Transfer the movie after shooting, as
described on pages 33-40.

1

Select [Communication settings].

2

Select [Network settings].

Once you have set [Communication func] to
[Enable], you can select [Network settings].

3

Select [Set up].

4

Select [Automatic transfer].

Select [Enable].

5

Take the picture.

X

The captured image is transferred to the FTP
server.

Automatic Image Transfer After Each Shot

During continuous shooting, images are transferred to the FTP server in the order they are captured.

The captured images are also stored on the memory card.

Any images for which transfer fails or is interrupted will be transferred automatically when the
wireless LAN connection is recovered (p.32). These images can also be transferred in batch
manually at a later time (p.36).

COP

Y

Advertising