Canon Wireless Transmitter WFT-E6A - Manual (Page 40)

40
Batch Transfer
1 On the [32] tab, select [Image
transfer].
2 Select [Image sel./transfer].
3 Select [All image].
4 Select [Card images not transferred].
To transfer images that could not previously be
transferred, select [Card images failed transfer].
5 Transfer the images.
Select [FTP Trans.].
Select [OK] on the confirmation screen displayed
next.
X A transfer progress screen is displayed.
Batch Transfer of Images on Memory Cards
Selecting [Clear card’s transf. history] will set the transfer history of images on the memory card to
“unsent.” This enables you to resend all the images on the card later by selecting [Card images not
transferred].
COP
Y