Canon PowerShot N - Manual (Page 11)

11
1
2
3
4
5
6
7
8
9
10
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Creative Shot
Mode
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
Basic Guide
Inserting and Charging the Battery
Insert the included battery into the camera for charging. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
1
Open the cover.
z z
Slide the cover ( ) and open it ( ).
2
Insert the battery.
z z
While pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
z z
If you insert the battery facing the wrong
way, it cannot be locked into the correct
position. Always confirm that the battery
is facing the right way and locks when
inserted.
3
Close the cover.
z z
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
Terminals Battery Lock
4
Connect the compact power
adapter to the camera.
z z
With the camera turned off, open the
cover ( ). With the smaller plug of the
included interface cable (
=
2) in the
orientation shown, insert the plug fully
into the camera terminal ( ).
z z
Insert the larger plug of the interface
cable into the included compact power
adapter.
5
Charge the battery.
z z
CA-DC30: Flip out the plug and plug the
compact power adapter into a power
outlet.
z z CA-DC30E: Plug the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
CA-DC30
CA-DC30E
COP
Y