Canon PowerShot N - Manual (Page 51)

51
1
2
4
5
6
7
8
9
10
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Creative Shot
Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
3
Advanced Guide
Auto Mode/
Hybrid Auto Mode
Customizing Camera Operation
Customize shooting functions on the [
4] tab of the menu as follows.
For instructions on menu functions, see “MENU Menu” (
=
30).
Still Images
Deactivating the AF Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter ring halfway in low-light conditions.
Configure the setting.
z z
Touch [ H], touch [n], choose
[AF-assist Beam] on the [
4] tab, and
then choose [Off] (
=
30).
z z
To restore the original setting, repeat this
process but choose [On].
Still Images
Changing the Image Display Style After Shots
You can change how long images are displayed and what information is
displayed immediately after shooting.
Changing the Image Display Period After Shots
1
Access the [Review image after
shooting] screen.
z z
After touching [ H], touch [n],
touch the [
4] tab, and then touch
[Review image after shooting] (
=
30).
2 Configure the setting.
z z
Choose [Display Time], and then choose
the desired option.
z z
To restore the original setting, repeat this
process but choose [Quick].
Quick Displays images only until you can shoot again.
2 sec., 4 sec.,
8 sec. Displays images for the specified time. Even while the shot is displayed,
you can take another shot by pressing the shutter ring halfway again.
Hold Displays images until you press the shutter ring halfway.
Off No image display after shots.
COP
Y