Using optional accessories, Using optional, Accessories – Canon PowerShot N User Manual
Page 113: Cop y
113
1
2
3
4
5
6
7
8
10
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Creative Shot
Mode
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Appendix
Index
Basic Guide
P Mode
Advanced Guide
9
Accessories
Still Images
Movies
Using Optional Accessories
Using the Battery Charger to Charge the Battery
1
Insert the battery.
z
z
After aligning the
o marks on the battery
and charger, insert the battery by pushing
it in ( ) and down ( ).
2
Charge the battery.
z
z
CB-2LB: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
z
z
CB-2LBE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
X
X
The charging lamp turns orange and
charging begins.
X
X
When charging is finished, the lamp turns
green.
3
Remove the battery.
z
z
After unplugging the battery charger,
remove the battery by pushing it in ( )
and up ( ).
CB-2LBE
CB-2LB
•
To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
•
For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
•
For details on charging time and the number of shots and recording time
possible with a fully charged battery, see “Number of Shots/Recording Time,
Playback Time” (
•
Charged batteries gradually lose their charge, even when they are not used.
Charge the battery on (or immediately before) the day of use.
•
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for
the plug. Never use an electrical transformer designed for traveling, which may
damage the battery.
Still Images
Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC70 (sold separately)
eliminates the need to monitor the remaining battery level.
1
Make sure the camera is off.
2
Insert the coupler.
z
z
Follow step 1 in “Inserting and Charging
the Battery” (
z
z
Insert the coupler facing the direction
shown, just as you would a battery
(following step 2 in “Inserting and
Charging the Battery” (
z
z
Follow step 3 in “Inserting and Charging
the Battery” (
Terminals
COP
Y