Canon XA25 - Manual (Page 123)

Introduction to Wi-Fi
123
NOTES
• While using Wi-Fi functions other than remotely controlling the camcorder using the Wi-Fi Remote
application, do not open the double memory card slot cover.
Before using Wi-Fi functions
Based on the function, the camcorder will wirelessly connect to a Wi-Fi-enabled device, such as a
smartphone, or directly to a Wi-Fi network via an access point (wireless router)*. After selecting the
function you want to use, follow the onscreen directions to connect the camcorder.
* Depending on the manufacturer, the access point may be referred to using a different name, such
as wireless LAN router or wireless network router.
• Make sure the optional WM-V1 Wireless Microphone is not attached to the camcorder. Wi-Fi
functions are not available when the microphone is attached.
About the Wi-Fi antenna
When using the camcorder’s Wi-Fi functions, do not cover
the Wi-Fi antenna with your hand or other object. Covering
it may interfere with wireless signals.
About the camcorder’s Wi-Fi standard
The specifications of the camcorder's Wi-Fi standard are as follows.
Wi-Fi protocol, operating frequency: IEEE 802.11b/g/n-compliant, 2.4 GHz
IEEE 802.11a/n-compliant, 5 GHz
Maximum data transfer rate: 11 Mbps (IEEE 802.11b)
54 Mbps (IEEE 802.11a/g)
150 Mbps (IEEE 802.11n)
These are theoretical values and actual data transfer rates may differ.
Wi-Fi antenna
COP
Y