Connecting to another camera, Connecting to, Another camera – Canon PowerShot ELPH 330 HS User Manual
Page 117: Cop y
117
1
2
3
4
5
7
8
9
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Auto Mode/Hybrid
Auto Mode
Other Shooting
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover
Advanced Guide
6
Wi-Fi Functions
•
You can connect to smartphones that you have already connected to by
choosing them on the [Select a Device] screen in step 3.
•
After you have accessed the Wi-Fi menu once, you can access it again by
pressing the <
o> button. The recent target device is listed first, so you can
easily connect again by pressing the <
o><p> buttons to choose it. To add
a new device, display the device selection screen by pressing the <
q><r>
buttons, and then configure the setting.
If you prefer not to display recent target devices, press the <
n> button,
and on the [
3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
•
The image quality level for movies that can be sent may differ depending
on the smartphone. Refer to the instruction manual provided with your
smartphone for details.
•
To add multiple smartphones, repeat the above procedures starting from step
1.
•
To change privacy settings for smartphones added to the list, choose the
smartphone whose settings you want to change from [Edit a Device] in step 3,
and then choose [View Settings].
Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
•
Only Canon-brand cameras equipped with a Wi-Fi function can be connected
to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot
be connected to if they do not have a Wi-Fi function. You cannot connect to
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS
cameras with this camera.
1
Access the Wi-Fi menu.
z
z
Press the <
o> button.
2
Choose a camera.
z
z
Press the <
o><p><q><r> buttons to
choose [
4], and then press the <m>
button.
3
Choose [Add a Device].
z
z
Press the <
o><p> buttons to choose
[Add a Device], and then press the <
m>
button.
z
z
Follow steps 1 – 3 on the target camera.
X
X
Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
X
X
When the target camera has been added
successfully, the image transfer screen
will be displayed. Proceed to “Sending
Images” (
COP
Y