Canon PowerShot ELPH 330 HS - Manual (Page 74)

74
1
2
3
5
6
7
8
9
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Auto Mode/Hybrid
Auto Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
Cover
Advanced Guide
4
P Mode
Still Images
Continuous Shooting
Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Continuous Shooting
Speed” ( = 173).
1 Configure the setting.
z z Press the < m> button, choose
[ ] in the menu, and then choose [ W]
( = 28).
X X Once the setting is complete, [ W] is
displayed.
2 Shoot.
X X Hold the shutter button all the way down
to shoot continuously.
• Cannot be used with the self-timer ( = 39) or [Blink Detection]
( = 51).
• During continuous shooting, focus and exposure are locked at the
position/level determined when you pressed the shutter button
halfway.
• Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
• As more shots are taken, shooting may slow down.
• Shooting may slow down if the flash fires.
• If you use Face ID ( = 42) in [ W], the name recorded in the image will be
fixed to the location where it is displayed in the first shot. Even if the subject
moves, the name will stay fixed in the same position for any subsequent shots.
Shooting Range and Focusing
Still Images
Shooting Close-ups (Macro)
To restrict the focus to subjects at close range, set the camera to [ e]. For
details on the focusing range, see “Shooting Range” ( = 173).
z z Press the < q> button, press the <q><r>
buttons to choose [ e], and then press
the < m> button.
X X Once the setting is complete, [ e] is
displayed.
• If the flash fires, vignetting may occur.
• In the yellow bar display area below the zoom bar, [ e] will turn gray
and the camera will not focus.
• To prevent camera shake, try mounting the camera on a tripod and shooting
with the camera set to [ [] ( = 39).
COP
Y