Canon PowerShot A2600 - Manual (Page 165)

165
ç Contents ç Chapter Contents
z z On the camera, open the
terminal cover and insert the
cable plug fully into the camera
terminal.
3
Turn the TV on and
switch to video input.
z z Switch the TV input to the video
input you connected the cable
to in step 2.
4
Turn the camera on.
z z Press the < 1> button to turn
the camera on.
X X Images from the camera are
now displayed on the TV.
(Nothing is displayed on the
camera screen.)
z z When finished, turn off
the camera and TV before
disconnecting the cable.
• Correct display is not possible unless the camera video
output format (NTSC or PAL) matches the TV format. To
change the video output format, press the < n> button
and choose [Video System] on the [ 3] tab.