Using eco mode, Configure the setting, Shoot – Canon PowerShot A2600 User Manual
Page 76
76
ç
Contents
ç
Chapter Contents
•
Shots taken without adding a date stamp can be printed with one as follows.
However, adding a date stamp this way to images that already have
one may cause it to be printed twice.
-
Print using printer functions (
)
-
Use camera DPOF print settings (
-
Use the software downloaded from the Canon website to print
For details, refer to the Software Guide (
).
Still Images
Movies
Using Eco Mode
This function allows you to conserve battery power in Shooting
mode. When the camera is not in use, the screen quickly darkens
to reduce battery consumption.
1
Configure the setting.
z
z
Press the <
q> button several
times until [
] is displayed.
X
X
The screen darkens when the
camera is not used for
approximately two seconds;
approximately ten seconds after
darkening, the screen turns off. The
camera turns off after approximately
three minutes of inactivity.
z
z
By pressing the <
q> button
again, [
] is displayed, and
Eco Mode is deactivated.
2
Shoot.
z
z
To activate the screen and prepare
for shooting when the screen is off
but the lens is still out, press the
shutter button halfway.