Canon PowerShot A2600 - Manual (Page 74)

74
ç Contents ç Chapter Contents
• When you specify multiple shots, image brightness and white
balance are determined by the first shot. More time is required
between shots when the flash fires or when you have specified to
take many shots. Shooting will stop automatically when the memory
card becomes full.
• When a delay longer than two seconds is specified, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the flash fires.)
Still Images
Deactivating the Flash
Prepare the camera for shooting without the flash as follows.
Configure the setting.
z z To deactivate the flash, press
the < r> button repeatedly until
[ !] is displayed.
z z To activate the flash, press
the < r> button again.
([ ] is displayed.) The flash
will automatically fire in low-light
conditions.
• If a flashing [ ] icon is displayed when you press the
shutter button halfway in low-light conditions, mount the
camera on a tripod or take other measures to keep it still.