Canon imagePROGRAF iPF6400S - Manual (Page 670)

Network Environment Network Environment
Network Environment Network Environment
System requirements
The system requirements, which vary depending on your network, are as follows.
• Printing over a TCP/IP network (when using IPv4)
• Compatible operating systems
• Windows XP
• Windows Server 2003
• Windows Vista
• Windows Server 2008
• Windows 7
• Windows 8
• Windows Server 2003 x64
• Windows Vista x64
• Windows Server 2008 x64
• Windows Server 2012 x64
• Windows 7 x64
• Windows 8 x64
• Mac OS X v10.2.8 or later
• Unix （Solaris 9）
• Unix （Red Hat 9）
• Printing over a TCP/IP network (when using IPv6)
• Compatible operating systems
• Windows Vista
• Windows Server 2008
• Windows 7
• Windows 8
• Windows Vista x64
• Windows Server 2008 x64
• Windows Server 2012 x64
• Windows 7 x64
• Windows 8 x64
• Mac OS X v10.3.8 or later
Note
• When using IPv6, you must specify IPv6 on the Control Panel or in RemoteUI. For instructions, "Configuring TCP/IPv6
Network Settings"
➔ P.678 or see "Configuring the Printer's TCP/IP Network Settings With RemoteUI."
➔ P.679
• The imagePROGRAF printer driver is supported in Mac OS X v10.6.8 or later.
• The imagePROGRAF printer driver is not compatible with Unix.
• Printing over an AppleTalk network
• Compatible operating systems
• Mac OS X v10.2.8–10.4
Note
• The printer cannot be used over a LocalTalk network.
• Compatible with EtherTalk Phase 2.
• The imagePROGRAF printer driver is not compatible with AppleTalk.
Network Environment iPF6400S
User's Guide
Network Setting
Network Environment
670