Canon imagePROGRAF iPF6400S - Manual (Page 978)

Cannot detect papr Cannot detect papr
Cause Corrective Action
The printer could not detect the paper. Reload the paper as follows.
1. Remove the paper and press the OK button.
2. Reload the paper.
(See "Loading Sheets in the Feed Slot.")
➔ P.533
(See "Loading Rolls in the Printer.") ➔ P.509
Cannot feed paper. Cannot feed paper.
Cause Corrective Action
Paper could not be ad-
vanced correctly during
feeding. 1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.")
➔ P.938
(See "Clearing a Jammed Sheet, Fed Manually.") ➔ P.941
3. Load the paper.
(See "Loading Rolls in the Printer.")
➔ P.509
(See "Loading Sheets in the Feed Slot.")
➔ P.533
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which the error occurred.
Paper could not be ad-
vanced correctly during
ejection. 1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.")
➔ P.938
(See "Clearing a Jammed Sheet, Fed Manually.")
➔ P.941
Cannot cut paper. Cannot cut paper.
Cause Corrective Action
There are sheets left on the
Ejection Guide. 1. Press the OK button and remove the paper.
2. Load paper.
3. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.") ➔ P.509
There is a foreign object by the
Output Tray, obstructing the
Cutter Unit. 1. Lift the Top Cover and remove the foreign object.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
You are not using the printer
under the recommended envi-
ronmental conditions for the pa-
per. Use the printer only where the recommended environmental conditions for the paper are met. Note that vari-
ous environmental conditions are recommended for various types of paper. For details on the recommended
environmental conditions, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
➔ P.500
You are using paper that is not
compatible with automatic cut-
ting. 1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll.
(See "Specifying the Cutting Method for Rolls.")
➔ P.520
For information about paper that is compatible with automatic cutting, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
➔ P.500
2. Press the OK button and remove the paper.
Cannot detect papr iPF6400S
User's Guide
Error Message
Messages regarding paper
978