End of paper feed, Borderless printng not possible, End of paper feed borderless printng not possible – Canon imagePROGRAF iPF6400S User Manual
Page 979
Cause
Corrective Action
In other cases, the Cutter Unit
may be damaged.
Contact your Canon dealer for assistance.
End of paper feed.
End of paper feed.
Cause
Corrective Action
Although an attempt was made to advance the paper manually, it reached the limit position
that can be advanced.
Canceling manual advancing.
(See "Feeding Roll Paper Manually.")
Borderless printng not possible.
Borderless printng not possible.
Cause
Corrective Action
The print job received speci-
fies a type or width of paper
that is not compatible with bor-
derless printing.
Follow these steps to change the settings of the print job to enable borderless printing.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Make sure the correct printer driver for the printer is selected and try printing again.
For information on types of paper compatible with borderless printing, refer to the Paper Reference
Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The document
will be printed with a border.
The loaded paper is a size not
compatible with borderless
printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
2.
Replace the paper with paper compatible for borderless printing.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the Paper Reference
Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The document
will be printed with a border.
The paper is loaded askew.
Press ▲ or ▼ to select Change Paper and straighten the paper so that the edges are between the ink
grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
For borderless printing on A1 (594 mm or 23.4 in) or A2 (420 mm or 16.5 in) rolls, attach the included Spacer
for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
Select None when you have set Detect Mismatch in the Control Panel menu to Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The document
will be printed with a border.
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
iPF6400S
End of paper feed.
Error Message
Messages regarding paper
979