Push af, Push af 59, Cop y – Canon XF305 User Manual

Page 59

Advertising
background image

59

Recording

3

Adjusting the Focus

2 Move the FOCUS switch to A.

• [I.AF] appears on the bottom left of the screen.

Setting the Autofocus Mode

You can select how the camcorder focuses during autofocus mode.

1 Open the autofocus [Speed] submenu.

[l Camera Setup]

[AF Mode]

[Speed]

2 Select the desired option and then press SET.

Options

Push AF

During manual focus mode or Normal AF mode, press the PUSH
AF button and hold it pressed down.

• The autofocus (Instant AF mode) is activated as long as you hold the

PUSH AF button pressed down. You can also use the PUSH AF button
on the optional ZR-2000 Zoom Remote Controller.

NOTES

• When recording in bright surroundings, the camcorder closes down the

aperture. This may cause the picture to appear blurred and is more
noticeable toward the wide-angle end of the zoom range. Turn the
built-in ND filter on/off according to the screen display (0 72).

• When you attach the optional WA-H82 Wide Attachment to the

camcorder, Instant AF and PUSH AF are not available.

• Autofocus takes longer to focus when the frame rate is set to [30P] or

[24P] than when it is set to [60i].

[l Camera Setup]

[AF Mode]

[Speed]

[Instant]

[Instant]:

Sets the autofocus mode to Instant AF. The focus is adjusted at
the highest speed. This mode is useful even when recording in
very bright or low-light surroundings. This mode uses both the
TTL system and external sensor for focusing.

[Normal]:

Sets the autofocus mode to Normal AF. The autofocus
adjustment is made at a stable speed.

COP

Y

Advertising
This manual is related to the following products: