Canon XF305 - Manual (Page 68)

Recording
68
3
Shutter Speed
Flicker Reduction
You can reduce flicker caused by recording under fluorescent lamps.
1 Open the [Flicker Reduction] submenu.
[l Camera Setup] [Flicker Reduction]
2 Select [Automatic] and then press SET.
NOTES
• When recording under artificial light sources such as fluorescent,
mercury or halogen lamps, the screen may flicker depending on the
shutter speed. You may be able to avoid flicker by setting the shutter
mode to Speed and the shutter speed to a value matching the
frequency of the local electrical system: 1/50* or 1/100 for 50 Hz
systems, 1/60 or 1/120 for 60 Hz systems.
* May not be available depending on the frame rate.
[l Camera Setup]
[Flicker Reduction]
[Off]
COP
Y