Canon PowerShot SX50 HS - Manual (Page 172)

172
Image Viewing Options
Erasing Names
z z Following step 3 above, choose [Erase]
and press the < m> button.
z z After [Erase?] is displayed, press the
< q><r> buttons or turn the <5> dial to
choose [OK], and then press the < m>
button.
Image Viewing Options
Still Images
Magnifying Images
Approximate Position
of Displayed Area
1
Magnify an image.
z z Moving the zoom lever toward < k> will
zoom in and magnify the image. You
can magnify images up to about 10x by
continuing to hold the zoom lever.
z z To zoom out, move the zoom lever
toward < g>. You can return to single-
image display by continuing to hold it.
2
Move the display position and
switch images as needed.
z z To move the display position, press the
< o><p><q><r> buttons.
z z To switch to other images while zoomed,
turn the < 5> dial.
• You can return to single-image display from magnified display by pressing
the < n> button.
COP
Y