Canon PowerShot SX50 HS - Manual (Page 64)

64
Using Face ID
z z Choose [Add to Registry], and then
choose [Add a New Face].
2
Register face information.
z z Aim the camera so that the face of the
person you want to register is inside the
gray frame at the center of the screen.
z z A white frame on the person’s face
indicates that the face is recognized.
Make sure a white frame is displayed on
the face, and then shoot.
z z If the face is not recognized, you cannot
register face information.
3
Save the settings.
z z After [Register?] is displayed, press the
< q><r> buttons or turn the <5> dial to
choose [OK], and then press the < m>
button.
COP
Y