Canon PowerShot SX50 HS - Manual (Page 252)

252
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way ( = 17).
Memory card locked
• The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position ( = 16).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way ( = 17).
Memory card error (= 204)
• If the same error message is displayed even when you have inserted a formatted memory
card facing the correct way, contact a Canon Customer Support Help Desk ( = 17).
Insufficient space on card
• There is not enough free space on the memory card to shoot ( = 45, 85, 113,
149) or edit images ( = 188 – 193). Either erase unneeded images (= 179) or
insert a memory card with enough free space ( = 16).
Charge the battery (= 15)
No Image.
• The memory card does not contain any images that can be displayed.
Protected! (= 175)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back AVI/RAW
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Cannot magnify!/Cannot play back this content in Smart Shuffle/
Cannot rotate/Cannot modify image/Cannot register this image!/
Cannot modify/Cannot assign to category/Unselectable image./No
identification information
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies. Magnify* ( = 172), Smart Shuffle* (= 174),
Categorize ( = 185), Rotate (= 182), Edit* (= 188 – 193), Assign as Start-up
Image* ( = 202), Print List* (= 238), Photobook Set-up* (= 243), and Edit ID
Info* ( = 171 – 172).
• Grouped images cannot be processed ( = 88).
COP
Y