Cop y – Canon VIXIA HF R52 User Manual

Page 169

Advertising
background image

Additional Information

Š

169

May not be possible to record movies on this memory card

- You may not be able to record movies on a memory card without a Speed Class rating or rated

CLASS 2. Replace the memory card with one rated CLASS 4, 6 or 10.

Mem. Card Number of scenes already at maximum

- The memory card already contains the maximum number of AVCHD scenes (3,999 scenes);

no further scenes can be copied onto the memory card. Delete some scenes (

A 53) to free

some space.

Mem. Card Unable to recognize the data

- The memory card contains scenes recorded using a video configuration that is not supported

(PAL or SECAM). Play back the recordings in the memory card with the device originally used
to record them.

Memory card cover is open

- After inserting a memory card, close the memory card slot cover.

Memory card is full

- The memory card is full. Delete some recordings (

A 53) to free some space or replace the

memory card.

Memory card is write-protected

- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi-

tion of the LOCK switch.

Memory card writing error Attempt to recover the data?

- This message will appear the next time you turn on the camcorder if power supply was acci-

dentally interrupted while the camcorder was writing to the memory. Select [Yes] to try to
recover the recordings. If you inserted a memory card that contains scenes recorded using
another device, we recommend that you select [No].

Need to recover files from the memory card. Change the position of the LOCK switch on the
memory card.

- This message will appear the next time you turn on the camcorder if power supply was acci-

dentally interrupted while the camcorder was writing on the memory card and later the posi-
tion of the card’s LOCK switch was changed to prevent erasure. Change the position of the
LOCK switch.

No memory card

- Insert a compatible memory card into the camcorder (

A 24).

- The memory card may not be inserted correctly. Insert the memory card all the way into the

memory card slot until it clicks.

B Not enough available space

- Delete some recordings on the memory card (

A 53).

- Select [Long Play] (LP or 4 Mbps) for the video quality (

A 56).

Number of scenes already at maximum

- The maximum number of AVCHD scenes (3,999 scenes) has been reached. Delete some

scenes (

A 53) to free some space.

COP

Y

Advertising
This manual is related to the following products: