Canon VIXIA HF R52 - Manual (Page 171)

Additional Information
Š 171
B List of Messages for Connecting to an External Hard Drive
B List of Messages for Wi-Fi Functions
Refer also to the instruction manual of your wireless router and other
devices you will use.
Too many photos and MP4 movies. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
and MP4 movies on the memory card to fewer than 2,500 (Windows), or 1,000 (Mac OS).
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
Unable to recognize the data
- The camcorder cannot play back scenes recorded using a video configuration that is not sup-
ported (PAL or SECAM). Play back the recordings with the device originally used to record
them.
Unable to recover data
- Could not recover a corrupted file. Save your recordings ( A 105) and initialize the memory
( A 29).
Error writing to external hard drive
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing to the external hard drive. Select [Yes] to
try to recover the recordings.
Quickly erases all files and deletes partitions from the external hard drive. Initialize?
- If you initialize the hard drive, all data it contains will be lost, including any partitioned drives.
If necessary, back up data and then initialize the hard drive with the camcorder.
Another user is already controlling the camcorder. Try again later.
- This message appears on the screen of the Wi-Fi device. Multiple Wi-Fi devices are trying to
connect with the camcorder. Make sure only one Wi-Fi device is trying to connect and then
touch Retry.
Invalid port number. Perform the setting again.
- The port number entered cannot be used. In the settings for the Monitor while Out function
( A 121) change the port number to a port that does not conflict with other devices.
IP address conflict
- Change the camcorder’s IP address to avoid any conflict with devices connected to the same
network. Alternatively, change the IP address of the conflicting device.
COP
Y