Canon PowerShot ELPH 135 - Manual (Page 101)

101
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Playback stops, or audio skips.
• Switch to a memory card that you have performed low-level formatting on with the
camera (
=
77 ).
•
There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
• When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Sound is not played during movies.
• Adjust the volume ( = 62 ) if you have activated [Mute] ( = 74 ) or the sound in
the movie is faint.
Memory Card
The memory card is not recognized.
•
Restart the camera, with the memory card in it (
=
20 ).
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
• Press the < 1> button to enter Playback mode. Hold the <n> button down as
you press the <
o> and <m> buttons at the same time. On the next screen, press
the < q><r> buttons to choose [B], and then press the <m> button.
Eye-Fi Cards
Cannot transfer images ( =
96
).
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
•
The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (
= 13 ).
Memory card locked
• The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position (
= 13 ).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (
= 13 ).
Memory card error ( =
77
)
• If the same error message is displayed even after you have formatted a supported
memory card (
=
2 ) and have inserted it facing the correct way (
=
13 ), contact
a Canon Customer Support Help Desk.
Insufficient space on card
•
There is not enough free space on the memory card to shoot ( = 25 , 39 , 47 )
or edit images ( = 70 – 72 ). Either erase unneeded images ( = 68 ) or insert a
memory card with enough free space ( = 12 ).
Charge the battery ( =
11
)
No Image.
• The memory card does not contain any images that can be displayed.
Protected! ( =
66 )
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back MOV/Cannot play back MP4
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.