Canon PowerShot ELPH 135 - Manual (Page 41)

41
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images Movies
P Shoot with snowy backgrounds
(Snow)
z z
Bright, natural-colored shots of people
against snowy backgrounds.
Still Images Movies
t Shoot fireworks (Fireworks)
z z Vivid shots of fireworks.
•
In [
t] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake.
ELPH 150 IS IXUS 155 ELPH 140 IS IXUS 150
•
Set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (
= 59 ).
• [ ] mode resolution is [ ] ( ELPH 150 IS IXUS 155 2560 x 1920/ ELPH 140 IS
IXUS 150 ELPH 135 IXUS 145
2304 x 1728) and cannot be changed.
• In [ t] mode, although no frames are displayed when you press the shutter
button halfway, optimal focus is still determined.
ELPH 135 IXUS 145
Still Images
Shooting with Reduced Motion Blur
(Digital IS)
Shoot with minimal camera and subject shake. In scenes where the flash
is not fired, consecutive shots are combined to reduce camera shake and
noise.
1
Enter [ ] mode.
z z Follow step 1 in “Specific Scenes”
(
=
40 ) and choose [ ].
2
Shoot.
z z
Press the shutter button halfway. [ ] is
displayed on the left side of the screen in
scenes where the flash is not fired.
z z
When [ ] is displayed, press the shutter
button all the way down. Images will be
shot continuously, and then be combined.
z z When the icon is not displayed, press the
shutter button all the way down to shoot a
single image.
•
Because the camera will shoot continuously when [ ] is displayed,
hold it steady while shooting.
• In some scenes, images may not look as expected.
• When using a tripod, shoot in [ ] mode (
=
26 ).
• [ ] mode resolution is [ ] (2304 x 1728) and cannot be changed.