You prefer, World clock, Lens retraction timing – Canon PowerShot ELPH 135 User Manual
Page 75: Power-saving adjustment
75
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
World Clock
To ensure that your shots will have the correct local date and time when you
travel abroad, simply register the destination in advance and switch to that
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in “Setting the Date and Time” (
1
Specify your destination.
z
z
Choose [Time Zone], and then press the
<
m> button.
z
z
Press the <
o><p> buttons to choose
[
World], and then press the <
m>
button.
z
z
Press the <
q><r> buttons to choose the
destination.
z
z
To set daylight saving time (1 hour
ahead), choose [
] by pressing the
<
o><p> buttons, and then choose [ ]
by pressing the <
q><r> buttons.
z
z
Press the <
m> button.
2
Switch to the destination time
zone.
z
z
Press the <
o><p> buttons to choose
[
World], and then press the <
n>
button.
z
z
[
] is now shown on the shooting screen
(
).
•
Adjusting the date or time while in [
) will automatically
update your [
Home] time and date.
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press
the <
1> button in Shooting mode (
). To have the lens retracted
immediately after you press the <
1> button, set the retraction timing to
[0 sec.].
z
z
Choose [Lens Retract], and then choose
[0 sec.].
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed (
).
z
z
Choose [Power Saving], and then press
the <
m> button.
z
z
After choosing an item, press the
<
q><r> buttons to adjust it as needed.
•
To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
•
The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
•
These power-saving functions are not available when you have set Eco mode
(
].