Canon PowerShot ELPH 135 - Manual (Page 15)

15
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images Movies
Trying the Camera Out
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1
Turn the camera on.
z z
Press the power button.
z z
The startup screen is displayed.
2
Enter [ ] mode.
z z
Press the <
o> button several times until
[ ] is displayed.
z z
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
ELPH 150 IS IXUS 155 ELPH 140 IS IXUS 150
z z
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
ELPH 135 IXUS 145
z z
A scene icon is displayed in the upper
right of the screen.
z z
Frames displayed around any detected
subjects indicate that they are in focus.
Display Language
Change the display language as needed.
1
Enter Playback mode.
z z
Press the <
1> button.
2
Access the setting screen.
z z
Press and hold the <
m> button, and
then press the <
n> button.
3
Set the display language.
z z
Press the <
o><p><q><r> buttons to
choose a language, and then press the
<
m> button.
z z
Once the display language has been set,
the setting screen is no longer displayed.
• You can also change the display language by pressing the < n> button
and choosing [Language ] on the [
3] tab.