Canon VB-C300 - Manual (Page 22)

1-8
System Components and Their Operation
Bottom
On the bottom of the VB-C300 there are the MAC address required for network settings, a Reset
switch that initializes settings and the serial number.
Serial No.
The serial number for
this unit is shown
here.
MAC address
Address unique to this
camera. Please make a
note before installing this
unit (
→ P.2-8).
Screw hole for tripod mounting
Reset switch
You can initialize settings
by pressing this button
with a thin-tipped object
while turning on the power
switch, and keeping the
button pressed for more
than five seconds after
turning on.
Screw hole for
Ceiling Bracket
Model Name
NTSC VB-C300NA
PAL VB-C300PA